Author Topic: Access to machine shop  (Read 461 times)

Offline tomjones20194

  • Forum User
  • Posts: 386
Access to machine shop
« on: May 26, 2021, 07:35:28 PM »
Does anyone here have access to a machine shop?  I used to have access to ones in prior jobs but not anymore. I need to use a band saw and a mill or lathe to make a couple of aluminum flanges for my Jeep supercharger project. I have the raw materials.

Let me know if you could help me out. I can pay with beer.


Sent from my iPhone using Tapatalk
1979 CJ-5 Renegade Levi Edition (360 V8)
2008 Wrangler Unlimited Rubicon



President: Scott Posti (Nacho) | Vice President: VACANT | Secretary: Robyn Alley (sticksout)
Treasurer: Danille Wilson (TJ Girl) | Member-at-large: VACANT

Board of Directors:
Dave Plummer (HAWAIICJ) | Sean McCready (Unl1mtd)
Jeff Wilson (jwilson2598) | Aaron Thomson (Jeep Freak) | Dain Wilson (Gr8Dain)

Founding Fathers:
 Jason Markvart (LNDSRK)  | Steve Scott (Islander90) | Josh Storer (Jastor)| Mike Finelli (BiggMike) | John Harper (Opie) | Andrew Harvin (HarvinJeep)

Disclaimer Statement:
All images from are exclusive to the Northern Virginia
Jeepers Association. Any reproduction of exclusive Northern Virginia
Jeepers Association material is strictly prohibited without written
consent of the Northern Virginia Jeepers Association. Jeep,
Wrangler, Cherokee, Commander, Compass, Patriot, Liberty, Unlimited,
Rubicon, SRT, HEMI and Grand Cherokee are copyrighted and trademarked
to Chrysler LLC., Northern Virginia Jeepers Association
is not in any way associated with the Chrysler LLC.