Author Topic: Tool Storage Input Needed - What Are Your Favorite Solutions??  (Read 320 times)

Offline gravitywell

  • Member 2021
  • *
  • Posts: 302
Re: Tool Storage Input Needed - What Are Your Favorite Solutions??
« Reply #15 on: April 08, 2021, 01:36:26 AM »
A web search will turn up several sources of tool boxes.  I went down this path  a few years ago and found  several companies  out there that offer great tool boxes  up to 72 inches wide. Just about bought one  right before buying the Jeep.....

one that I found is:
https://www.strictlytoolboxes.com/all-toolboxes.html?stb=1&gclid=Cj0KCQjwsLWDBhCmARIsAPSL3_1yJ8b3HEaqEXsPYgvPwvQUkU27K9J9h_0gLtZFJhs5BM4fG82PYp4aApCMEALw_wcB

Cheers

Thanks, but I already purchased the Craftsman setup.  I was curious about everyone's storage solutions in their tool box drawers.

What did you use for socket and wrench organizers?  Dain chimed in and stated he used ones he could grab-and-go for the trails. 

So following Dain's advice, I ordered 3 of these: https://www.amazon.com/gp/product/B01N0ZYPKH/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
And two of these to begin with: https://www.amazon.com/gp/product/B078K3Q9V5/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
I have very similar strips. I alternated the sides for the clips, and even bought more clips.

I keep shallow on one side, and deep on the other.

I have another strip that has basic metric in one side and basic standard on the other.

I keep them in my trail bag when off roading.

Sent from my HD1925 using Tapatalk

2018 2 Door Wrangler JK - Willys W

Offline Jeepin_Donnie

  • Club President
  • *
  • Posts: 1931
Re: Tool Storage Input Needed - What Are Your Favorite Solutions??
« Reply #16 on: April 08, 2021, 05:32:53 PM »
A web search will turn up several sources of tool boxes.  I went down this path  a few years ago and found  several companies  out there that offer great tool boxes  up to 72 inches wide. Just about bought one  right before buying the Jeep.....

one that I found is:
https://www.strictlytoolboxes.com/all-toolboxes.html?stb=1&gclid=Cj0KCQjwsLWDBhCmARIsAPSL3_1yJ8b3HEaqEXsPYgvPwvQUkU27K9J9h_0gLtZFJhs5BM4fG82PYp4aApCMEALw_wcB

Cheers

Thanks, but I already purchased the Craftsman setup.  I was curious about everyone's storage solutions in their tool box drawers.

What did you use for socket and wrench organizers?  Dain chimed in and stated he used ones he could grab-and-go for the trails. 

So following Dain's advice, I ordered 3 of these: https://www.amazon.com/gp/product/B01N0ZYPKH/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
And two of these to begin with: https://www.amazon.com/gp/product/B078K3Q9V5/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
I have very similar strips. I alternated the sides for the clips, and even bought more clips.

I keep shallow on one side, and deep on the other.

I have another strip that has basic metric in one side and basic standard on the other.

I keep them in my trail bag when off roading.

Sent from my HD1925 using Tapatalk

Awesome!  I was using small tool bags previously.  Now I need to purchase a trail bag!
Mods, they never end.  My rig needs a sponsor!  :)

Offline gravitywell

  • Member 2021
  • *
  • Posts: 302
Re: Tool Storage Input Needed - What Are Your Favorite Solutions??
« Reply #17 on: April 08, 2021, 09:05:19 PM »
A web search will turn up several sources of tool boxes.  I went down this path  a few years ago and found  several companies  out there that offer great tool boxes  up to 72 inches wide. Just about bought one  right before buying the Jeep.....

one that I found is:
https://www.strictlytoolboxes.com/all-toolboxes.html?stb=1&gclid=Cj0KCQjwsLWDBhCmARIsAPSL3_1yJ8b3HEaqEXsPYgvPwvQUkU27K9J9h_0gLtZFJhs5BM4fG82PYp4aApCMEALw_wcB

Cheers

Thanks, but I already purchased the Craftsman setup.  I was curious about everyone's storage solutions in their tool box drawers.

What did you use for socket and wrench organizers?  Dain chimed in and stated he used ones he could grab-and-go for the trails. 

So following Dain's advice, I ordered 3 of these: https://www.amazon.com/gp/product/B01N0ZYPKH/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
And two of these to begin with: https://www.amazon.com/gp/product/B078K3Q9V5/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
I have very similar strips. I alternated the sides for the clips, and even bought more clips.

I keep shallow on one side, and deep on the other.

I have another strip that has basic metric in one side and basic standard on the other.

I keep them in my trail bag when off roading.

Sent from my HD1925 using Tapatalk

Awesome!  I was using small tool bags previously.  Now I need to purchase a trail bag!
I bought a couple of Puma duffle bags from Amazon. Medium sized, they fall perfectly into the footwell of my 2dr jk. One is for tools, other for recovery. There were like, $20 each, I won't cry if they get damaged.

Sent from my HD1925 using Tapatalk

2018 2 Door Wrangler JK - Willys W

 

Officers:

President: Donnie Herrity (Jeepin_Donnie) | Vice President: Hiam Agha (BLACKHAWKJEEP)| Secretary: Robyn Alley (sticksout)
Treasurer: Danille Wilson (TJ Girl) | Member-at-large: Scott Posti (Nacho)

Board of Directors:
Dave Plummer (HAWAIICJ) | Sean McCready (Unl1mtd)
Jeff Wilson (jwilson2598) | Aaron Thomson (Jeep Freak) | Dain Wilson (Gr8Dain)

Founding Fathers:
 Jason Markvart (LNDSRK)  | Steve Scott (Islander90) | Josh Storer (Jastor)| Mike Finelli (BiggMike) | John Harper (Opie) | Andrew Harvin (HarvinJeep)

Disclaimer Statement:
All images from NoVaJeepers.net are exclusive to the Northern Virginia
Jeepers Association. Any reproduction of exclusive Northern Virginia
Jeepers Association material is strictly prohibited without written
consent of the Northern Virginia Jeepers Association. Jeep,
Wrangler, Cherokee, Commander, Compass, Patriot, Liberty, Unlimited,
Rubicon, SRT, HEMI and Grand Cherokee are copyrighted and trademarked
to Chrysler LLC. NoVaJeepers.com, Northern Virginia Jeepers Association
is not in any way associated with the Chrysler LLC.