Author Topic: Alloy USA Axles  (Read 211 times)

Offline mopar31898

  • Member 2020
  • *
  • Posts: 300
Alloy USA Axles
« on: February 11, 2020, 11:22:33 AM »
Does anyone have any first hand experience/opinions of Alloy axles in the rear of their Wrangler? 

Sent from my Pixel 4 XL using Tapatalk


Offline BLACKHAWKJEEP

  • Member 2020
  • *
  • Posts: 272
Re: Alloy USA Axles
« Reply #1 on: February 11, 2020, 06:03:49 PM »
I can ask my shop for any input if you'd like. If you have some questions I'll send it straight to them  :wrench
Women Wheelers | IG: @offroadelites & @ladyhawkjk

Offline unl1mtd

  • BOD
  • *
  • Posts: 9866
  • King George, VA
Re: Alloy USA Axles
« Reply #2 on: February 11, 2020, 06:55:17 PM »
Back when they first came out I ran them in my LJ. No issues. I think they might have changed ownership since then though.
unl1mtd@novajeepers.com   

Offline cwkann

  • WC, VRC, EC
  • Committee: Trail Rides
  • *
  • Posts: 8178
  • Winchester, VA
Re: Alloy USA Axles
« Reply #3 on: February 12, 2020, 08:27:58 AM »
I have them in mine and have had no issues.
'03 Rubicon- 4.5" RE LA, 37"s, A bunch of skids by TNT, Poison Spyder, EMP, Rock Hard, Warn, Kilby and custom fab work.  CAI, Power chip, Exhaust, 4.88 gears and chromoly axles by Yukon. OBA and Powertank, one ton steering, Teraflex Swaybar system, MM 9500lb winch and a bunch of other stuff...

Offline mopar31898

  • Member 2020
  • *
  • Posts: 300
Re: Alloy USA Axles
« Reply #4 on: February 12, 2020, 06:05:27 PM »
Thanks for the input everyone. Seems like no real issues with these. Now I have to go spend some money.

Sent from my Pixel 4 XL using Tapatalk

Offline jwilson2598

  • Webmaster
  • BOD
  • *
  • Posts: 4752
Re: Alloy USA Axles
« Reply #5 on: February 12, 2020, 10:11:04 PM »
Just to throw another alternative at you, check out the East Coast Gear Supply axle shafts. I ran them in my JKU and they were great. Alloy USA is good too, I just was able to get the ECGS ones at a good price.
Jeff

2020 Gladiator Rubicon Launch Edition, 35" Wildpeak AT3W, Warn VR12-s winch, Mopar winch guard, Redarc brake controller
2004 Wrangler Unlimited, 2" lift, 265/75/16 Wildpeak AT3W, Moab wheels, Mopar/AEV front and rear bumpers, JVC DDIN radio with backup camera

Offline mopar31898

  • Member 2020
  • *
  • Posts: 300
Re: Alloy USA Axles
« Reply #6 on: February 14, 2020, 09:16:00 AM »
Thanks for all the input everyone. I will check out all the suggestions.

I'm looking into some major upgrades to the Jeep since some other parts fell in my lap. I appreciate people's experiences to know what parts are good and what to avoid.

Sent from my Pixel 4 XL using Tapatalk


 

Officers:

President: Stephen Clough (overhead) | Vice President: Donnie Herrity (Jeepin_Donnie) | Secretary: Robyn Alley (sticksout)
Treasurer: Danille Wilson (TJ Girl) | Member-at-large: Brit Nora (rebel4sale)

Board of Directors:
Dave Plummer (HAWAIICJ) | Sean McCready (Unl1mtd)
Jeff Wilson (jwilson2598) | Aaron Thomson (Jeep Freak) | Dain Wilson (Gr8Dain)

Founding Fathers:
 Jason Markvart (LNDSRK)  | Steve Scott (Islander90) | Josh Storer (Jastor)| Mike Finelli (BiggMike) | John Harper (Opie) | Andrew Harvin (HarvinJeep)

Disclaimer Statement:
All images from NoVaJeepers.net are exclusive to the Northern Virginia
Jeepers Association. Any reproduction of exclusive Northern Virginia
Jeepers Association material is strictly prohibited without written
consent of the Northern Virginia Jeepers Association. Jeep,
Wrangler, Cherokee, Commander, Compass, Patriot, Liberty, Unlimited,
Rubicon, SRT, HEMI and Grand Cherokee are copyrighted and trademarked
to Chrysler LLC. NoVaJeepers.com, Northern Virginia Jeepers Association
is not in any way associated with the Chrysler LLC.